Connect with us

Technology

Apple iPhone SE 3 CAD-Based Renders Leaked, Shows Design Reminiscent of the iPhone XR

Published

on

Facebook Meta watch 1

Facebook Meta watch 1

Apple is working on the third generation of the iPhone SE model and it could launch around March or April this year. The iPhone SE series is the most affordable iPhone series that the Cupertino based company sells globally. The CAD based renders of the iPhone SE 3 has leaked online, courtesy of a leaker named Xleaks7.

The design shows that the iPhone SE 3 will have a design similar to the iPhone XR. It will come with rounded corners, slim bezels, and a wide notch to house the Face ID and selfie camera sensor. Let’s take a look at the iPhone SE 3 leaked renders, specs, and features.

iPhone 3 SE Display Size and Features

Apple is rumoured to launch the iPhone SE 3 later in Spring this year. The report from TenTechreview reveals the CAD-based renders of the iPhone SE 3. Based on the leaks, the iPhone SE 3 will have rounded edges at the corner. It will have the traditional wider notch on the front for the Face ID and other sensors. The iPhone SE 3 could have the thinnest bezels on the iPhone SE series so far.

As per the report, the iPhone SE 3 will flaunt a 5.69-inch display. The phone will measure 138.4 x 67.3 x 7.3mm (8.2mm thickness with camera bump included) and that display will be 131.3 x 60.2mm.

Advertisement

It will have a single camera on the back with a LED flash and the traditional Apple logo. The power button and SIM tray are visible on the right side of the phone while the alert slider and volume buttons should be on the left side. The renders are available in White colour, it is possible that Apple will unveil more colour options for the iPhone SE 3.

The Apple iPhone SE 3 is expected to come either with the A14 or A15 Bionic chip and will support 5G connectivity.

Thanks for reading till the end of this article. For more such informative and exclusive tech content, like our Facebook page

Advertisement

Technology

[Exclusive] Infinix Zero 5G with Dimensity 900 and 120Hz Refresh Rate Display Launching Soon in India

Published

on

Infinix Note 11

Infinix Note 11
Representative Image

Last month, Infinix, a Transsion holding, confirmed that it is working on its first 5G handset – Infinix Zero 5G. The handset has already been spotted on Google Play Console. Now, MySmartPrice has exclusively learnt that the Inifinix Zero 5G will soon launch in the Indian market, courtesy of industry sources. Our source also confirms that the Zero 5G will be powered by a Dimensity 900 processor. The handset will feature a Uni-curve design and offer a 120Hz refresh rate display.

Infinix Zero 5G: Design and Renders

Infinix Zero 5G MySmartPrice

Infinix Zero 5G will offer a bezel-less display with a punch-hole notch. The back panel of the device will house a triple rear camera setup and LED flash. The device will retail in atleast two colour options. The left edge of the handset will house the volume rockers. While, the right edge will make room for the power button which will also double as the fingerprint scanner.

Infinix Zero 5G: Rumoured Specifications

Last month, the design and the specifications of the upcoming Infinix handset were leaked in a hands-on video. The hands-on video revealed that the Zero 5G will offer a 6.7-inch Full HD+ AMOLED display with a 120Hz refresh rate and 1080 x 2460 pixel resolution. The display will also feature a centered punch hole notch to make room for the selfie shooter.

Advertisement

The Zero 5G will be powered by an octa-core MediaTek Dimensity 900 processor which comes with an integrated Mali G68 GPU. The Dimensity 900 is built on a 7nm fabrication process and brings with it 5G connectivity to the table.

The Zero 5G will offer a triple rear camera setup including a 48MP sensor. The handset is said to offer an ultra-wide-angle lens and a telephoto lens. However, the resolution and other information about these sensors aren’t known yet.

The Zero 5G might offer a 5,000mAh battery unit and 33W fast charging support. It is said to boot Android 11 with the company’s proprietary XOS skin on top.

What do you think of Infinix Zero 5G? Do let us know in the comments below.

Advertisement

Thanks for reading till the end of this article. For more such informative and exclusive tech content, like our Facebook page

Advertisement
Continue Reading

Technology

Nubia RedMagic 7 Pro 5G Gaming Smartphone Listed on 3C Certification Website, to Feature 165W Fast-Charging

Published

on

Nubia RedMagic 7 Pro 5G Gaming Smartphone Listed on 3C Certification Website to Feature 165W Fast Charging

Nubia RedMagic 7 Pro 5G Gaming Smartphone Listed on 3C Certification Website to Feature 165W Fast Charging

Nubia is gearing up for the launch of its RedMagic 7 series launch. The company has confirmed that it will launch the new gaming smartphone flagship series in China in February. The exact launch date of the RedMagic 7 series is unknown at the moment. While we wait for that, some new details of the Pro model have surfaced online.

The Nubia RedMagic 7 Pro is listed on the 3C certification website ahead of its official launch. The listing on 3C confirms the fast charging details of the gaming smartphone. Let’s take a look at the Nubia RedMagic 7 Pro specifications and features revealed so far. 

Nubia RedMagic 7 Pro 3C

The Nubia RedMagic 7 Pro is listed on 3C with the model number NX709J. The listing has revealed the device’s fast charging details. It confirms that the phone will come with support for 165W fast charging out of the box.

Advertisement

Red Magic 7 Pro 3C

The vanilla model, which has the model number NX679J, will also come with 165W fast charging support. Its global variant could come with 65W fast charging support, according to an FCC listing. The devices are likely to pack a 4500 mAh battery under the hood.

Other details of the Nubia flagship smartphone remain unknown at the moment. We can, however, expect the phone to come with a Snapdragon 8 Gen 1 processor. The phone, like the vanilla model, could also come with 18GB of RAM.

Details of the vanilla model have surfaced online as well. The company has teased the transparent rear panel design, which shows a triple-camera setup on the back. The phone will come with a 64MP primary camera and a 16MP front camera. 

At the front, the vanilla model will come with a 6.7-inch OLED display with a Full HD+ resolution. It will also have an in-display fingerprint scanner. The phone will run Android 12 out of the box with a layer of RedMagic UI on top.

Advertisement

More details of the phones should surface online in the coming days. What are your thoughts on the upcoming gaming smartphones from Nubia? Do let us know in the comments below.

Thanks for reading till the end of this article. For more such informative and exclusive tech content, like our Facebook page

Advertisement
Continue Reading